Ray Newman wrote:
> Now I need to find someone to help me build a little project board to
> do just that.
>
> My experience is only the PIC16 series and that is only in assembly
> language.
>
> Any suggestions anyone?

It wouldn't be too hard to start with a QuickProto-01
(http://www.embedinc.com/products) and add a ENC28J60, ethernet transformer,
and RJ-45.  If it's not a one-off, it's probably better to do a custom
board.  The cost of the board is really not much in the scheme of things,
since the software costs will dominate.

We've got experience with TCP on a 18F.  One of my current projects includes
a 18F6527 doing both wired ethernet via a ENC28J60 or WiFi via a compact
flash card depending on configuration.

How many of these things do you need?  When do you need them by?  Do you
have a budget for this project?


******************************************************************
Embed Inc, Littleton Massachusetts, (978) 742-9014.  #1 PIC
consultant in 2004 program year.  http://www.embedinc.com/products
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist