> I changed from a standard bcf on PORTC as I have read about the
> read-modify-write problems.  When I call this sub, I put the 
> number of the
> bit I want to clear in the W register.  This then reads PORTC 
> and places it
> in RAM_PORTC, clears the bit in the variable and writes the 
> entire byte back
> to PORTC

that won't do no good. think again about the 'reads PORTC' part in
relation to the read-modify-write issue.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist