In SX Microcontrollers, SX/B Compiler and SX-Key Tool, kroki78 wrote:

Hi! i'm an SX newbie. I have many experience with BS2/BS2P and a little with PIC. Now i need to control a 24x8 char serial LCD with SX28.
I use SX/B cause i'm used to Basic, and i have many problems with ASM:-)
It recieves 9600Baud data. I tryed the simple SEROUT ra.1, T9600, "@" and i also tried N9600 too, but it doesn't work.
I figured, that maybe the oscillator isn't correct, so i tried the internal 4Mhz, 20Mhz and 50Mhz oscillators and even a 3.6864Mhz Baud rate oscillator, and no result, only sometimes some random char.

The funny thing is that on the PIC with some basic compiler it works with a simple serout, like the one above.

Could anyone help me solve this problem?

p.s.: is it possible to SEROUT data in SX/B in 7bit format?

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=131079

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)