In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bean wrote:

Joe,
  Most likely the LCD is missing characters as it moves to the next line.
  Try putting a PAUSE 10 after sending the "6" and before sending the "7"

HIGH RE.7
PAUSE 100
SEROUT RE.7,T9600,$0c
PAUSE 250
SEROUT RE.7,T9600,"1"
SEROUT RE.7,T9600,"2"
SEROUT RE.7,T9600,"3"
SEROUT RE.7,T9600,"4"
SEROUT RE.7,T9600,"5"
SEROUT RE.7,T9600,"6"
SEROUT RE.7,T9600,"7"
SEROUT RE.7,T9600,"8"
SEROUT RE.7,T9600,"9"
SEROUT RE.7,T9600,"0"
SEROUT RE.7,T9600,"1"
SEROUT RE.7,T9600,"2"
SEROUT RE.7,T9600,"3"
SEROUT RE.7,T9600,"4"
SEROUT RE.7,T9600,"5"
SEROUT RE.7,T9600,"6"
PAUSE 10
SEROUT RE.7,T9600,"7"
SEROUT RE.7,T9600,"8"
SEROUT RE.7,T9600,"9"
SEROUT RE.7,T9600,"0"
SEROUT RE.7,T9600,"1"
SEROUT RE.7,T9600,"2"

Bean.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=130245#m130247

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)