I received my frst order in this endeavor from DigiKey this morning
and wired up a rat Shack protoboard for the MSP430F2013 in 14 pin
DIP. Essentially I duplicated in electrical function the target board
of the EZ430 kit. I cobbled together a connector, wiring the 4 pin .
050 socket header back to back with 4 inch wires to a 4 pin .100
socket header ... not fun! I then brought up the IAR Workbench and
recompiled, loaded and ran the "Blinking LED," I moved the LED from
pin top pin and edited the output and recompiled reloaded several
times ... all was well in Mudville! For details check the WebLog at
Soooooooooooooo, I have 25 MSP430F2013IN chips (14 pin DIP) and 2
dozen connectors (and more of both on the way) available. Until we
all get a feel for this, I am limiting quantities to up to five
chips and up to 3 connectors per order. More info and ordering can be
done here:
---------
cheers ... 73 de brian riley, n1bq , underhill center, vermont
Home of the
K107 LCD Controller Kit
FT817 Power Conditioner Kit
Tab Robot Laser Tag Kit
MSP430 Accessories
--
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist