>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 24 May 2006 19:25
>To: Microcontroller discussion list - Public.
>Subject: Re: [PIC] WiFi & PIC
>
>
>This is not possible.
>Wifi is 2.4 GHz
>Pic is less than 100MHz
>Therefore, you cannot implement a wifi device with a pic.

2.4GHz is simply the RF carrier frequency which has nothing to do with the clock rate of a PIC.  The OP simply wants (or doesn't, as the case may be!) to be able to control a WiFi device with a PIC, not build one from scratch with a PIC generating the RF.

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist