In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Dunnsept wrote:

There's a 4.7k pullup built into the board  this is the DS2760 kit from parallax. 
I pinched the end of the TC wire between thumb and fingers and then ran debug. the values I was getting in the two bytes did not change. and yet the reset returned a 2 indicating a good connection. I do remember seeing someplace where they had mapped out the 16bits returned and what each bit meant. There was one for open TC junction and so on, but neither can I find it nor remember if those are implemented in the parallax kit

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=127447#m127452

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)