MIne took a lot longer to read than I thought it should, but it read ... send me your snail mail address offlist to and I will burn you a copy. cheers ... 73 de brian riley, n1bq , underhill center, vermont Home of the K107 LCD Controller Kit FT817 Power Conditioner Kit Tab Robot Laser Tag Kit On May 22, 2006, at 4:58 AM, Michael Rigby-Jones wrote: > Mine arrived in the post this weekend, but the CDROM is totaly > unreadable in any of the 4 PC's I've tried it in (the CD/DVD drives > either make a strange chirping noise or just constanly spin up and > down). Anyone else experienced this? > > Regards > > Mike > >> -----Original Message----- >> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] >> Sent: 14 May 2006 02:13 >> To: Microcontroller discussion list - Public. >> Subject: Re: [EE] A report on the TI EZ-430 F-2013 >> >> >> I received mine too. The IDE isn't bad and lots of documentation. May >> 25th is "World Wide 430 Day" and TI is sponsoring 3 hour seminars >> (free seminar, lunch, and EZ 430 F2013) all over the world. I managed >> to catch a seat at the seminar in Montreal back last March. I think >> they are all fully subscribed by now. I have searched hi and low on >> the TI website for the little plug-in board with the MSP430F2013, an >> LED and a dozen pinout holes to no avail. That's one question I plan >> to ask at the seminar. If you are gonna be prototyping a supply of >> these boards would seem to be needed. >> >> ---- >> cheers ... 73 de brian riley, n1bq , underhill center, vermont >> >> Home of the >> K107 LCD Controller Kit >> FT817 Power Conditioner Kit >> Tab Robot Laser Tag Kit >> >> >> On May 13, 2006, at 8:15 PM, John Nall wrote: >> >>> Just for info, the following is something that a friend sent >> me. (The >>> link is http://www.ti.com/corp/docs/landing/ez430tool/index.htm? >>> DCMP=430Day&HQS=Other+OT+ez430). >>> > > ====================================================================== > = > This e-mail is intended for the person it is addressed to only. The > information contained in it may be confidential and/or protected by > law. If you are not the intended recipient of this message, you must > not make any use of this information, or copy or show it to any > person. Please contact us immediately to tell us that you have > received this e-mail, and return the original to us. Any use, > forwarding, printing or copying of this message is strictly > prohibited. > No part of this message can be considered a request for goods or > services. > ====================================================================== > = > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist