At 05:59 PM 5/16/2006 -0400, you wrote:
>Hi everyone,
>
>I recently bought some SS49E hall sensors that are made by Honeywell. There
>is just one problem: I can not find the pin out for this device. I've
>downloaded every document that Honeywell has on the web about the SS49E, and
>these documents tell many fine things, but no where is the pin out mentioned.
>
>The SS49E is a three terminal device and it wouldn't take long to discover
>the correct pin out, but being a poor hobbyist I don't want to destroy a
>device needlessly.
>
>Can anyone offer any help?

Sure.

It's marked on all the data sheets, just in fine print. Look at the
mechanical drawing and the symbols +, -, O by the leads. That's for the
supply voltage and O is for the Output.

>Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
->>Test equipment, parts OLED displys http://search.ebay.com/_W0QQsassZspeff


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist