>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 12 May 2006 18:26
>To: Microcontroller discussion list - Public.
>Subject: RE: [PIC] PICKit 2 now supports PIC18J device and more PIC16Fs
>
>
>Mike,
>
>On Fri, 12 May 2006 12:37:49 +0100, Michael Rigby-Jones 
>wrote:
>
>> Is the hex file you are after Howard?
>> 
>http://ww1.microchip.com/downloads/en/DeviceDoc/Pk2V0120
>00.zip
>
>It is, Thanks!
>
>How did you find it?  (I went from the Home page to 
>Development Tools, then PICkit 2, and the stuff there is 
>still the older versions).

Looked at the format of the link to version 1.1, modified the file name to version 1.2 and struck lucky!

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist