Spehro Pefhany wrote:

> [...] but there are not really that many things to learn ([...] which
> parts orientation matters on [...]).

That kind of remembers Olin's message about silk screen clean-up... I'd say 
that this should be something that can be found out by looking at the silk 
screen (or the component drawing): if orientation matters, it should be 
marked in the drawing.

Gerhard

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist