Carey Fisher wrote:
> I like:
> 
> PCB100xxxRev0 (xxx in sequence from 001) for bare PCB including Gerber 
> filename prefixes
> 
> AS100xxxRev0 (matching the PCB xxx) for stuffed PCB Assys.  (Usually 
> mark the PCB "AS/PCB100xxxRev0")
> 
> TP100xxxRev0 (matching the PCB xxx) for Test Processes for the specific 
> PCB Assy.
> 
> Note that the 100xxx are just assigned in sequence and are not 
> meaningful except as they relate between the PCB, AS & TP prefixes.  
> These numbers are generally document numbers (AS100xxxRev0 is Assy and 
> Assy Drawing AS100xxxRev0) as well as, in AS & PCB cases, hardware 
> numbers.  Keep the Revs Sync'd!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Keep the Revs Sync'd?

Why? Would this include the BOM also?  I'm not sure I understand the 
idea about rev levels on documentation all being the same.

Is this the idea that if you modify the pcb layout, then the schematic, 
bom, assy dwgs, etc. all get their rev levels bumped up one to match it?


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist