> Is 0.94% too much error?? Or why would it be so terrible result?

I have done 115k2 with an 18F252 at 40 MHz without problem, but that was
with an FT232BM so the actual 115k2 path was only centimeters (but it
did include optocouplers). Are you sure your peer is right on frequency?
No excessive (asymmetric) edge delays in the cable or the drivers? Not a
software problem (maybe overruns?)

Make a simple test program: echo everything you receive straight back
(set the PIC for 1 stop bit, PC for 2 stop bits). See if that still
gives errors => probably a hardware problem (including baudrate
miscmatches). No errors => you probably has a software problem.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist