As Alan noted, the inline pins are for the A-type connector, and square pins are for a B-type connector. I'm not sure what library you're using for the connector, but the one at ftp://ftp.cadsoft.de/eagle/userfiles/libraries/con-usb-2.lbr does include several types of USB connector (that's the one I use) On 4/21/06, nicholasdatt@yahoo.co.uk wrote: > > Hi Randy, thanks for explaining about the socket. Now, my only question > is why the pins in eagle are in a line. Aren't the pins usually arranged > in a quare format, is this a US/Europe difference issue? > > > RA = right angle, so the connector would come in parallel to the PCB. > > This kind of connector is used on basically everything. With a > > vertical connector, the USB plug would be perpendicular to the PCB. > > > > Single refers to the fact that there's only one USB receptacle, and 4 > > pole = 4 pins. > > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- -Randy Glenn Computer Eng. and Mgt. Year IV, McMaster University Regional Student Representative, IEEE Canada randy.glenn-at-gmail.com - glennrb-at-mcmaster.ca randy.glenn-at-computer.org - randy_glenn-at-ieee.org http://www.randyglenn.ca -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist