At 01:25 AM 4/20/2006, Bob Axtell wrote:
> >
>AP Circuits offers a non-SS/non-SM versions for very little. Might even
>be less than $1/PCB. But
>their process is 1/2 oz copper, doesn't work well on SOME designs. They
>are in Alberta, Canada.

Hi there, Bob.

I've talked to APC about the half-ounce copper thing - that's the 
copper weight BEFORE plating.  They plate 1 ounce on top of 
that.  This gives them 1 ounce plating inside all the plated-through 
holes and 1.5 ounce on the top and bottom layers.

This appears to be identical to the production suppliers we use (S&P 
Flex Circuits, Network Circuits, Quick Circuits).

dwayne

-- 
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 22 years of Engineering Innovation (1984 - 2006)
  .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
     `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist