>From all the stripboard autorouting requests on the list, I'm guessing someone could make a little bit of money by developing a stripboard EDA package. Given the restraints of stripboard, it wouldn't be overly difficult either... Then they can hope to be bought out by veroboard and live in luxury for a few months. -Adam On 4/13/06, nicholasdatt@yahoo.co.uk wrote: > > > Also, is there a way to prevent tracks from top and bottom overlapping - > > > this is when the red and the blue on the screen merge and form pink?? > > > > Not that I can think of. You can specify keepout areas for the > autorouter, > > but not automatically make a trace on one layer a keepout on another. Why > > do you want this? This sounds like you are getting stuck in an > > implementation rathole, and need to step back and think about how to solve > > the true problem. > > No, it's because I am working with a stripboard. In a stripboard the blue > layer > must be implemented on both sides (because the strips are one way.) This > leaves us with a situation that if the red layer overlaps the blue layer and > if the > blue layer needs to be implemented on top(the other direction to the strips) > we get an impossibility. > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist