On 4/5/06, Wouter van Ooijen <wouter@voti.nl> wrote:
> [Eagle] Where can I specify the trace width the autorouter will use? It
> does not seem to use the default width (the one that is used when I draw
> a trace manually), and I don't see a setting in the autorouter
> configuration.

One good solution is to go with one width (after you've routed power
supplies and/or power route/plan manually) let the router to do all
bulshits and then correct
manually the mistakes and route widts.
Don't try this for mixed designs, you'll be dissapointed even if using
restricted areas.

Vasile


>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
> docent Hogeschool van Utrecht: www.voti.nl/hvu
>
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist