Edit / netclasses

You can specify which classes get each width and spacing, but it's always been an annoyance that every piece of trace connected to the same signal has to be the same netclass and gets routed in the same size. (so large power traces with smaller branches to individual chips must be done by hand)

-Denny

----- Original Message ----- 
From: Wouter van Ooijen <wouter@voti.nl>
To: 'Microcontroller discussion list - Public.' <piclist@mit.edu>
Sent: Wednesday, April 05, 2006 4:56 AM
Subject: [EE] eagle autorouter trace width


> [Eagle] Where can I specify the trace width the autorouter will use? It
> does not seem to use the default width (the one that is used when I draw
> a trace manually), and I don't see a setting in the autorouter
> configuration.
> 
> Wouter van Ooijen
> 
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
> docent Hogeschool van Utrecht: www.voti.nl/hvu
>  
> 
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist