> I tried doing "xwisp.py verbose go tut2_1" as suggested, and 
> it gets a lot
> further.  The "verbose" command puts out a lot of information, but
> eventually puts out:
> 
> Send_Expect( "3D18w")
> . . .  (followed by some trackback information) . . .
> _main_.Wbus_Protocol_Error: send=' 3D18w'  received=' 3D18?'
> 
> Then it quits.
> 
> Running without the verbose command produces  the same thing 
> (except a lot
> less info printed out).

can you give the full output of the non-verbose version? verbose is
usefull to debug protocol problems, but what you have here is not a
protocol problem.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist