Has anyone successfully heat sunk 1N400x diodes?

Filtering out the

    - add more copper
    - change the orientation/location/...
    - use larger diodes
    - use a bridge
    - use a fan
    - liquid cool / heat pipe / transcendental meditation ...
    - get a life ...

responses :-)

I'm actually interested in things done to get more heat out of 1N400x 
diodes.
PCB copper is about at a maximum.
Lead lengths are small (which is meant to be best)
They are where they are at present.
They are operating within nominal spec but get far hotter than I'd 
like them to.
(They handle under 1A mean but current is pulsed at rather more so 
heating is disproportionately high

16 diodes are in two parallel rows of 8
I vaguely toyed with the idea of clamping a heatsink bar along a row.
Contact an issue - thermal goo or conductive washer.
Uneven mounting height an issue.
I can imagine that even a very modestly sized an L or inverse T of 
aluminum in conduct with the diode bodies would offer far better 
cooling than at present.

Coating in a thermally conductive compound that doesn't creep may 
assist. And may not.

Thoughts? Experiences?


        Russell McMahon


 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist