In SX Microcontrollers, SX/B Compiler and SX-Key Tool, EROK wrote:

Hi everyone,

 

Re: Lost view of "Command Box" (panel)

 

I'm new to this forum and this is my first post.  I just purchased the SX Tech Tool Kit Professional and I'm going over all the manuals, etc.

 

I loaded SK-Key v3.1 software and SXSim program and wrote a simple Basic program.  I compiled it and ran it on the simulator.  All worked fine and the Command and I/O panels displayed correctly.  I have been using the SXSim program for the past several days, but, yesterday the Command panel did not display when the SXSim was re-run.  The "Command" box on the bottom tray showed that it was running.  I toggled the box but the Command Panel did not display.  I also right clicked on it but nothing diplayed.  The last time I used the SXSim, when everything was working,  I did remember clicking the "Quit" button on the Command Panel to remove the display, after ending the SXSim program.

 

Today I did downloaded and installed the latest version of SXSim (v2.08.04).  I ran it under SX-Key v3.1 and this did not help.

 

Any idea on how to restore the view of the "Command Panel".

 

The best to all,

 

Eric Kuegler (Ericro)

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=8&m=53539#m115220

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)