----- Original Message ----- 
From: "pic" <pictalk@btinternet.com>
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Sent: Saturday, March 11, 2006 6:55 AM
Subject: Re: [PIC]


>
>
>> Maybe first just try to turn led on or off.  See what led does when you
>> don't turn it on or off, then try to get  it to change state.  Once you
> get
>> it where one program turns it on and another program turns it off, you 
>> can
>> try to get it to flash.
>
> ok, I will try this now, i.e. turn a led on, then off, then on, then
> check if it is still on after that. I shall report back shortly.
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist