Like this?
http://www.zetex.com/3.0/product_portfolio.asp?pno=ZXMHC3A01T8&h=41

Don't know about low quantities, though...

Marcel

Peter wrote:
> Hi all,
> 
> I have been looking and I cannot seem to find a useful part that is
> also popular, and obtainable. I am looking for an integrated FET H
> bridge for up to 30V and 2A, without drive circuitry. This is to
> drive solenoids, dc motors, and stepper phases. I have looked at
> parts from Allegro, ST, and Linear, as well as some TI and IR (like
> level shifters for high side and half bridge FET drive). There does
> not seem to be a 'standard' part for this and yet most small motors
> and actuators in consumer devices are within this power range (not to
> mention amateur robotics, RC cars and many other things).
> 
> So far putting one of these drives together has involved a bucketfull
> of parts, every time I did not want to use an all-integrated solution
> (like http://www.allegromicro.com/sf/3950/index.asp). I also would
> like the full bridge in a case (or two bridges in a case). Something
> like L298 but with MOSFETs and lower dissipation. Or, better,
> something like L298 with the chopper part built in but no sequencer.
> 
> Any clues would be welcome.
> 
> Peter
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist