This works exceptionally well for me...

Mirror your image and laser colour print (b/w or colour) onto transparency. 
Spray over the printed side with white gloss or semi gloss paint. When paint 
dry :-) cover with double sided tape, spend some money and get tape wide 
enough so you don't need multiple strips. Cut out the label, stick it on!

Worth paying $5 to get it colour laser printed (if you don't have one yourself). 
Inkjet poorer quality in terms of moisture handling and UV. Good quality 
adhesive makes this waterproof and will last ages. Tactile switches can be 
work through this too, just place a small piece of plastic (hole puch a piece of 
transparency and use the dots stamped out) over the exposed adhesive to 
stop it sticking to the switch (makes it wear better too).

If you do it right it will look proffessional.

-- 
Brent Brown, Electronic Design Solutions
16 English Street, Hamilton 2001, New Zealand
Ph: +64 7 849 0069
Fax: +64 7 849 0071
Cell/txt: 027 433 4069
eMail:  brent.brown@clear.net.nz


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist