>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 01 March 2006 05:06
>To: Microcontroller discussion list - Public.
>Subject: [OT] Water pump ideas
>

>Primary goals:
>
>1: Reasonable implementation cost
>
>2: Low operating cost
>
>3: Quiet
>
>4: Modest short term demand capability. Say 2 L immediately at 
>ambient - 15 
>degrees C or so, a two or three hour recovery time is fine.
>
>5: Fun doing it :-)
>
>Any good alternatives or ideas?

Buy a filter jug, fill with tap water and place inside refrigerator.  Fulfils requirements 1 through 4 ;-)

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist