> > > Part Number: AC164121 - Ethernet PICtail Daughter Board
> > >   This is a replacement cable for the cable that arrives with the
MPLAB
> > ICD 2 Kit (DV164005), MPLAB ICD 2 Evaluation Kit (DV164006), the MPLAB
ICD 2
> > ws (DV164007), the MPLAB ICD 2 w/ dsPICDEM Starter Demo Board
(DV164030),
> > and the MPLAB ICD 2 w/ dsPICDEM 1.1 GP Demo Board (DV164032).
> >
> > I see what you means, it is confusing on the microchip direct site,
>
> Yes, they seem to have made a pig's ear of the buying part of the web
site.
>
> > I only need the schematic, I wonder if the schematic will be in the box
>
> Sadly not!  I received one of these recently (after being out of stock, so
this may be from the first
> production run) and you get the board itself, the usual: list of contents
/ registration card / pink "Read
> First" sheet, plus an A6 leaflet specific to this board.
>
> The latter has a list of the jumpers' functions and defaults, the "Signal
Interface" connections, and a note
> that to get "Other information" and example Firmware for particular
development boards you should go to
> http://www.microchip.com/Ethernet/.
>
> "Other Information" is listed as: User's Guide, Source Code, Board
Description, Application Examples, Board
> Schematics, and Links to Web Site Seminars.
>
> I have been to the web site a number of times but so far I haven't been
able to find most of this...  perhaps
> it's early days, and they are in the process of producing this stuff?

It's all there, have a look inside the stack software, the link was posted.

>
> Cheers,
>
>
> Howard Winter
> St.Albans, England
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist