In SX Microcontrollers, SX/B Compiler and SX-Key Tool, George Herzog wrote:

One of the sites I mentioned has a 'translation/comparison spread sheet' that I am using to convert PIC code to SX.  
It really is just for one type [the 16C5X series] and obviously there are some omissions, but it is a good start.

Sadly, my printout doesn't have the Address on it, so I have lost the source.

There is a lot of code that can be converted over.  Some is on robotics sites [e.g., Seattle Robotics]  PIClist offers a wealth of transferible information.

Going from PIC to SX is much easier as the relationship is NOT one-to-one, but MANY-to-one in that direction.  I just noticed that BasicAtom has have bare PIC project boards that can be use with the SX-18 and provide MAX-232 and DB9 on board.  I am not sure if the SX-28 is compatible with their other one [that uses 28 pins/40pins], but it is worth some reading up on.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111603#m111734

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)