> Wouter, if the winpic software or whatever supported selecting which
> pins to use, you could use the HVP control line as LVP so long as you
> can set the inversion on it, which I assume should be controllable if
> winpic is configurable for pins.. Make sense?

OK, now it makes sense (to me): you were talking about the PC lines, not
the PIC pins! I read it as if you were speculating about somehow
reconfiguring the 'HVP' pin of the PIC.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist