>
>
> I did properly load the other voltage lines BTW, measured a 1A draw on
> the 12V and 0.1A on -12 and -5


Something to know about multi-output switchers.
There is one output that is used to do the regulation. All the others are
either unregulated, or regulated with linear regs.  A high load on the
regulated output causes extra energy to be delivered to all the outputs.
They usually make some assumptions about other loads being of some
proportion to the main load.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist