Here's another head-scratcher from an Eagle novice.  The Vcc and ground connections are missing from most of the ICs on my board.  They don't appear on the schematic either, although they're present in the devices themselves (in the library).  This wouldn't be a huge problem if not for the fact that Eagle won't seem to let me route traces manually if there isn't already an "airwire" connection.  Is there some command to make the predefined device power connections appear on the schematic and/or the board?

Many thanks,
Rob
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist