Hi Rob,

in eagle, simply use the invoke button ( somwhere on the left where "add"
is) and then select the power options as you like.

this will put a pair of pins on the SCH so that you can put power to them.

Regards
John



On 2/15/06, Rob Robson <rob@silk.net> wrote:
>
> Here's another head-scratcher from an Eagle novice.  The Vcc and ground
> connections are missing from most of the ICs on my board.  They don't appear
> on the schematic either, although they're present in the devices themselves
> (in the library).  This wouldn't be a huge problem if not for the fact that
> Eagle won't seem to let me route traces manually if there isn't already an
> "airwire" connection.  Is there some command to make the predefined device
> power connections appear on the schematic and/or the board?
>
> Many thanks,
> Rob
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



--
--
Regards
John

DISCLAIMER: The information in this message is confidential and may be
legally privileged. It is intended solely for the addressee. Access to
this message by anyone else is unauthorised. If you are not the
intended recipient, any disclosure, copying, or distribution of the
message, or any action or omission taken by you in reliance on it, is
prohibited and may be unlawful. Please immediately contact the sender
if you have received this message in error. Thank you.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist