> Here's another head-scratcher from an Eagle novice.  The Vcc 
> and ground connections are missing from most of the ICs on my 
> board.  They don't appear on the schematic either, although 
> they're present in the devices themselves (in the library).  
> This wouldn't be a huge problem if not for the fact that 
> Eagle won't seem to let me route traces manually if there 
> isn't already an "airwire" connection.  Is there some command 
> to make the predefined device power connections appear on the 
> schematic and/or the board?

reading the manual? in this case, read about the invoke command. but
IMHO the real solution is to create your own symbols, with alwsys-visble
power connections.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist