Rob Robson <rob <at> silk.net> writes:

> 
> Here's another head-scratcher from an Eagle novice.  The Vcc and ground 
connections are missing from most
> of the ICs on my board.  They don't appear on the schematic either, although 
they're present in the devices
> themselves (in the library).  This wouldn't be a huge problem if not for the 
fact that Eagle won't seem to let
> me route traces manually if there isn't already an "airwire" connection.  Is 
there some command to make the
> predefined device power connections appear on the schematic and/or the board?

I had same problem while ago.  Solution that worked forme is to use the same 
supply symbol as in the device.  Some devices have Vcc, other Vdd etc. Same 
power supply but different symbols.

Sergey




-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist