In SX Microcontrollers, SX/B Compiler and SX-Key Tool, _BPM_ wrote:

Is assembly language different that depends on the microcontroller you are using?

The reason I ask is because when I compile this assembly code, to run on my sx28 using the sx-key program, I get compile errors galore.

I am slowly TRYING to convert it using the sx-key manual, and the daubach manual.  But its quite confusing.  Do I even need to convert the program?

[code]
$MOD751
; **************************************************
;* *
; * HDM3224 Application Note V1.0 *
;* *
; **************************************************
; The processor clock speed is 16MHz.
; Cycle time is .750mS.
; Demo software to display a bonsai
; tree bitmap image and 4 lines of
; text on a 320 x 240 LCD.
org 00h
ljmp start ;program start
org 100h


; Initialize the 32241
; Text page 0000h 04afh
; Graphics page 04b0h 2a2fh
start:
	mov r1,#40h ;system set
	lcall comm32
	mov dptr,#msg1 ;ss param
	lcall data32
	mov r1,#44h ;scroll
	lcall comm32
	mov dptr,#msg2 ;scroll param
	lcall data32
	mov r1,#5dh ;csr form
	lcall comm32
	mov dptr,#msg3 ;csr param
	lcall data32
	mov r1,#4ch ;csrdir
	lcall comm32
	mov r1,#5ah ;hdot scr
	lcall comm32
	mov dptr,#msg18 ;hdot param
	lcall data32
	mov r1,#5bh ;overlay
	lcall comm32
	mov dptr,#msg4 ;ovrly param
	lcall data32
	mov r1,#59h ;disp on/off
	lcall comm32
	mov dptr,#msg5 ;disp param
	lcall data32

	; clear the text page
	lcall clrtext

	; display bitmap
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg6
	lcall data32
	mov r1,#42h ;mwrite
	lcall comm32
	mov dptr,#msg12
	lcall data32

	; display text
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg7
	lcall data32
	mov r1,#42h ;mwrite
	lcall comm32
	mov dptr,#msg14
	lcall data32
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg8
	lcall data32
	mov r1,#42h ;mwrite
	lcall comm32
	mov dptr,#msg15
	lcall data32
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg9
	lcall data32
	mov r1,#42h ;mwrite
	lcall comm32
	mov dptr,#msg16
	lcall data32
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg10
	lcall data32
	mov r1,#42h ;mwrite
	lcall comm32
	mov dptr,#msg17
	lcall data32
	
sjmp $ ;stop



;*************************************************
;SUBROUTINES
; comm32 sends the byte in R1 to the
; 32241 display as a command
comm32:
	setb RA.2 ;a0=1=command

comm321:
	mov a,r1 ;get data byte
	mov RB,a
	clr RA.0 ;CS the display
	clr RA.1 ;strobe
	setb RA.1
	setb RA.0
	ret
	
; write32 sends the byte in R1 to the
; 32241 display as a data byte.
write32:
	clr RA.2 ;a0=0=data
	sjmp comm321
	
; data32 sends the message pointed to
; by the DPTR to the 32241 display.
data32:
	clr a ;get the byte
	movc a,@a+dptr
	cjne a,#0a1h,data321;done?
	ret

data321:
	mov r1,a
	lcall write32 ;send it
	inc dptr
	sjmp data32 ;next byte
	
; Clear text RAM on the 3224
clrtext:
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg13 ;cursor param
	lcall data32
	mov r1,#42h ;mwrite
	lcall comm32
	mov dptr,#msg11 ;all spaces
	lcall data32
	mov r1,#46h ;set cursor
	lcall comm32
	mov dptr,#msg6
	lcall data32
	ret


;************************************************
; TABLES AND DATA
; Initialization parameters for 3224.

msg1:
	db 30h,87h,07h,27h ;system set
	db 39h,0efh,28h,0h,0a1h

msg2:
	db 0,0,0efh,0b0h ;scroll
	db 04h,0efh,0,0
	db 0,0,0a1h

msg3:
	db 04h,86h,0a1h ;csr form

msg4:
	db 01h,0a1h ;overlay param

msg5:
	db 16h,0a1h ;disp on/off

msg6:
	db 0b0h,04h,0a1h ;set cursor to
	;graphics page

msg7:
	db 31h,2h,0a1h ;set cursor
	;text page
	;1st line

msg8:
	db 59h,2,0a1h ;2nd line

msg9:
	db 81h,2,0a1h ;3rd line

msg10:
	db 0a9h,2,0a1h ;4th line
	; 1200 spaces for text page clear
	; The following table is not listed
	; here, except for the first 8 bytes,
	; but consists of 1200 bytes
	; all of which are 20h

msg11:
	db ' '
	db 01ah

msg18: db 0,01ah ;hscr param
	; 320x240 bonsai tree graphic
	; The following table is not listed
	; here. It consists of 9600 bytes
	; which constitute a full screen
	; bit map image of a bonsai tree.
	; You may add a few bytes before the
	; 01ah termination byte for testing
	; puposes or include a complete
	; bitmap image

msg12:
	db 01ah

msg13:
	db 0,0,01ah ;set cursor
	;to text page

msg14:
	db 'HANTRONIX'
	db 0a1h

msg15:
	db 'Crystal Clear and'
	db 0a1h

msg16:
	db 'Visibly Superior'
	db 0a1h

msg17:
	db 'LCD Modules'
	db 0a1h


end
[/code]

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=109150

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)