Hi All,
I setup my PIC16F876 for pwm. When I observed the output with a scope, the
output is very low (just about 450mV for high). However, the frequency and
duty circle seems okay. This is even without attaching any load to the pin.

Many thanks for your anticipated help.

PS: Am a bit new to PIC

--
Kind Regards,

Yau
ygarba@gmail.com
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist