Ignore parts of my previous post, The 245 IS usb-Paralell, didn't read all
the text.

With best regards

Tomas Larsson
Sweden

Verus Amicus Est Tamquam Alter Idem

> -----Original Message-----
> From: piclist-bounces@mit.edu 
> [mailto:piclist-bounces@mit.edu] On Behalf Of Alan B. Pearce
> Sent: Friday, February 10, 2006 3:39 PM
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC]: Getting started with USB
> 
> 
> >The FDTI chip normaly emulates a comport,
> 
> While I agree this is true for the FT232 serial chips, I am 
> not sure about the FT245. I was assuming it looked like a 
> parallel printer port to the OS.
> 
> >and Mchip has a Comport driver and FW as well.
> >I think however that a HID driver and FW is a better choice.
> 
> Well, I was figuring on emulating the FT245, to save driver 
> development. I do not know (and so far haven't got the time 
> to investigate) precisely how the Labview driver handles the 
> FTDI dll. It may be all much easier than I suppose, as the 
> original article does seem to say it is reasonably simple in 
> that area.
> 
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at 
> http://mailman.mit.edu/mailman/listinfo/piclist
> 


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist