>
> With the half hearted approach the casino and our slot tech take they
> don't remove and replace the whole machine for me to examine.  I got
> only the PIC chips sent back to me.  I believe I checked them right off
> and the EEPROM read correctly and not as all zero for those three bytes.
> With code protect on that meant I believe I put the chips in a board and
> homed the reels and they didn't go to zero.



You have me curious.. This home location parameter sounds like something
that dosen't change, but it's in EE?   If it dosen't change, it should be
hardcoded.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist