> -----Original Message-----
> From: piclist-bounces@mit.edu 
> [mailto:piclist-bounces@mit.edu]On Behalf Of Vitaliy
> 
> There's nothing wrong with the library. Remember I mentioned 
> that the Tx/Rx lines are connected? Well, what happens is 
> as I transmit the  string, it gets  fed into the Rx pin, 
> and causes buffer overflow. Like I said, I was  overlooking 
> something very obvious.
> 
> Thanks, Xiaofan!
> 
> Vitaliy

Thanks for reporting back the real cause of the problem. I will
say it is not that obvious. At least I do not know until now.

In fact, I seldom used the MPLAB simulator but it seems that
it can really help out with debugging. 

In this case, I was following the MPSIM tutorial "Getting Started 
with MPLAB SIM --Using a USART/UART" yesterday and tried the code. 
MPSIM is really useful especially because that it steps into the
source codes for the library functions.

Regards,
Xiaofan

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist