Victor Windreader wrote:
> I bought some solder paste in a syringe with a tip and did some
> SMT work but the tip dispensed waaaaay to much paste. I ended up
> placing paste dots on the pads using a pin. This worked OK but was 
> tedious. Where can I find syringe paste with a finer tip?
> 
> Any enlightenment will be appreciated.
> 
> Vic
We bought a bunch from Mcmaster-Carr (http://www.mcmaster.com/).  They 
have lots.

gauge	opening	 p/n		price($US)
14 	0.063" 	 6699A1  	$14.89
16 	0.048" 	 6699A2  	  14.78
18 	0.034" 	 6699A3  	  14.67
20 	0.024" 	 6699A4  	  14.56
22 	0.017" 	 6699A5  	  14.44
24 	0.013" 	 6699A6  	  14.33

Above are bags of 50, fit luer lock syringes (which is what Kester paste 
comes in).  You can snip the tip off to make a larger opening if the one 
you get is too small.  I can't remember the size but think it was the 
.034" one from the above list.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist