I bought some solder paste in a syringe with a tip and did some
SMT work but the tip dispensed waaaaay to much paste. I ended up
placing paste dots on the pads using a pin. This worked OK but was 
tedious. Where can I find syringe paste with a finer tip?

Any enlightenment will be appreciated.

Vic
-- 
*Victor Fraenckel
KC2GUI
victorf ATSIGN windreader DOT com

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist