This is not correct, you have mono from one channel only then.
To get the full audio range, add the left and right channel simply
with two resistors, and a third one to ground.

> If this is not related to the question you raised please ignore it.
> Rich   If you have a stereo and you use only one channel, it is mono.
There
> is no conversion necessary.  If you have a balance control, simply move
the
> balance pot to maximum at the channel you use. > > Marcel Birthelmer
wrote:
> >
> >>Hi all,
> >>what would be a good way to convert stereo audio to mono?

> > I think you would use an opamp with two inputs. In some applications the
> > signals might be a bit out of phase giving a strange output.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist