In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Wrenow wrote:

Not sure exactly what your are asking.  I would presume you are taking a reading from the pots (used as a voltage divider) at least once per cycle, and each cycle needs to put out a set of signals each 20ms, so, I am guessing every about 20 ms.  Unless the ship has the capability of multitasking and doing a continuous monitoring.  The ideal, I guess, would be continuous monitoring of the various pots and dials, but I have no idea of the capabilities.  Of course, if the monitoring and calculation can be done as discrete serial steps fast enough to do it all in the pause portion of the pulse stream, then the result is the same.

Wreno

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=106994#m107050

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)