Well, I tried powering the circuit off a battery and without having
the mains plugged in, or the switch cord(6ft) plugged in, and unit
STILL is affected by the microwave and fridge kicking on/off.  I was
even using a scope on a different ac line from the microwave and
fridge, and I saw the EMI/RFI on the scope input(while looking at a
captured waveform on a entirely different project). I also tried a
12f675 instead and it still exhibited the same problems.

andrew

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist