Have you tried rebooting your computer?  Sometimes the simplest things work
wonders.  Just a thought.


On 1/24/06, Dumitru Stama <list@mirosat.com> wrote:
>
>
> Well, it seems my luck has just ran out.
> I have ( maybe it is not broken :-/ ) an Olimex clone of ICD2 and i
> was using it to test my programs written in C18 for PIC18F452.
> Everything worked like a charm until a certain moment when i tried to
> update my latest version of the little program i was developing and
> the ICD2 would not connect.
> It gets into USB bus because i can see it in Device manager but MPlab
> would not connect to it at all. When i am not using an external power
> source it just sais :
>
> Connecting to MPLAB ICD 2
> ICD0021: Unable to connect with MPLAB ICD 2
> MPLAB ICD 2 Ready
>
> When i connect a 9v dc wall adapter to the interface the error changes
> to :
>
> Connecting to MPLAB ICD 2
> ICD0019: Communications:  Failed to open port:
> (Windows::GetLastError() = 0x2, 'The system cannot find the file
> specified.')
> ICD0021: Unable to connect with MPLAB ICD 2
> MPLAB ICD 2 Ready
>
> I think it just died on me :-(
> Is there someone on this list that had the same problem in the past
> and fixed it somehow ? I am just starting to get paranoid about this
> because everytime i tried to start with PICs i stopped at some point
> but not because of me. I am reallllly close to just go and buy an
> official ICD2 from a store near by but it is quite expensive ~250$.
> Maybe you guys encountered this before and can guide me into fixing
> this unfortunate event.
>
> Thank you in advance for your time
> Dumitru Stama
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



--


Shawn Wilton (b9 Systems)
http://black9.com
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist