Peter Todd wrote:
> Well I did some tests with 1N4148's... Tested about 50 of them at
> different voltages all supplied by a very beefy 25A power supply.

Your circuit won't have a beefy 25A power supply.  To make the test
meaningful you should blow them in a way your circuit could too.  I think
that means charging up a big cap to a certain voltage then discharging it
accross the fuse.  You can experiment with different capacitances and
voltages.  Low ESR caps will be better, which you can get by putting several
of them in parallel.  You will probably need to do that anyway to get
sufficient capacitance.


******************************************************************
Embed Inc, Littleton Massachusetts, (978) 742-9014.  #1 PIC
consultant in 2004 program year.  http://www.embedinc.com/products
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist