Hi Adam,

Thanks for your reply. I found some additional information about this 
connector. The male part that is in the cable departing from the lens is an 
E4-192J (or other type of E4-xxxx), manufactured by a japan company named 
Chuomusen. The mating connector I need starts with a D4-xxxx. I found them 
on the manufacturer's website, which is only available in japanese, and I 
couldn't find a USA distributor. Here it goes the link to the manufacturer's 
site (with pictures)

http://www.qqq.co.jp/buhin/micro/index.htm
Click on any one of the D4-xxxx links.


I'm just about to give up on these connectors and simply cut the cable and 
install my own connector. What I found weird is that most (if not all) lens 
manufacturers use this connector, I'm astonished that I couldn't find a US 
distributor that would carry this part.

Cheers

Padu

----- Original Message ----- 
From: "M. Adam Davis" <stienman@gmail.com>
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Sent: Wednesday, January 11, 2006 8:32 AM
Subject: Re: [EE] cctv 4 pin square connector - where?


> You may need to put a picture of it up for someone to point you in the
> right direction.  Since this can be very camera and manufacturer
> specific it is unlikely that your current text description is going to
> raise much interest.
>
> -Adam
>

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist