You may need to put a picture of it up for someone to point you in the
right direction.  Since this can be very camera and manufacturer
specific it is unlikely that your current text description is going to
raise much interest.

-Adam


On 1/9/06, Padu <padu@merlotti.com> wrote:
> Hi,
>
> I just purchased a CCD color camera and a DC-iris lens. I don't want to plug the DC-iris cable (male) from the lens to the camera but instead control the signal by myself.
>
> I could cut the cable and install whatever connector I wanted, but if I could find its female counterpart (either wire-to-wire or board mouted) that would be a cleaner solution.
>
> I've been looking aroung google, mouser, digikey and even the allmighty 3000 pages molex catalog, and I couldn't find anything that would fit. Do you know where else could I look to find such a connector?
>
> The lens datasheet describe it as a "4 pin square connector"
>
> Thanks
>
> Padu
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist