It's a camera mux, so it not going to be used often...

Mauricio Jancic
Janso Desarrollos
Microchip Consultant Program Member
info@janso.com.ar
www.janso.com.ar
+54 11 4542 3519
> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
> Of Mike Hagen
> Sent: Tuesday, January 10, 2006 7:14 PM
> To: Microcontroller discussion list - Public.
> Subject: Re: [EE] BNC Connector distance...
> 
> That depends, are you going to be taking them off and on all the time.  Or
> is a patch panel that seldom gets used.  If you want fast easy access add
> more space for fingers.  If they are seldom used reduce space.  Use an
> oscilloscope or a piece of test gear for estimation?
> 
> 
> ----- Original Message -----
> From: "Mauricio Jancic" <info@janso.com.ar>
> To: "'Microcontroller discussion list - Public.'" <piclist@mit.edu>
> Sent: Tuesday, January 10, 2006 2:05 PM
> Subject: [EE] BNC Connector distance...
> 
> 
> > Hi,
> >
> >            Can anyone tell me what would be the minimum distance between
> > BNC connectors? I have a panel with 16 columns of 3 rows of connectors
> and
> > I
> > would like to know the minimum distance. anyone?
> >
> >
> >
> > Regards,
> >
> >
> >
> > Mauricio Jancic
> >
> > Janso Desarrollos
> >
> > Microchip Consultant Program Member
> >
> > info@janso.com.ar
> >
> > www.janso.com.ar
> >
> > +54 11 4542 3519
> >
> >
> >
> > --
> > http://www.piclist.com PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
> >
> 
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist