These units are excellent! I'm working with then at the moment too. The pin
pitch is no big deal if soldering them directly on a pcb. If prototyping
you'll probably need sockets though & these are not as common as 0.1 inch.
I'm using M22-6111022 from HARWIN.

What version firmware are they shipping with now? (mine were 1.06 last
October) They have released 2 beta updates since then, but I've not seen any
updates on their website. 

The support people told me back in November that mesh would be out by the
end of the year. That deadline may have slipped.

Joe


> -----Original Message-----
> From: piclist-bounces@mit.edu 
> [mailto:piclist-bounces@mit.edu] On Behalf Of Marc Nicholas
> Sent: 08 January 2006 17:26
> To: Microcontroller discussion list - Public.
> Subject: Re: [EE]: Maxstream Xbee Zigbee radios
> 
> 
> "Self-routing/Self-healing mesh networking (downloadable 
> firmware version coming soon)" That's from the 
> manual....it'll be interesting to see when/if they release 
> that firmware ;-)
> 
> -marc
> 
> 
> On 1/8/06, Timothy Weber <tw@timothyweber.org> wrote:
> >
> > Great, thanks!  My impression was that they didn't support 
> it at all, 
> > but if it's coming, that'd be good to know.
> >
> > Marc Nicholas wrote:
> > > Funnily enough, I wrote Maxstream's tech support last night about 
> > > the
> > mesh
> > > configuration and self-healing...I'll let the y'all know 
> what their
> > response
> > > is.
> >
> > --
> > Timothy J. Weber
> > http://timothyweber.org
> > --
> > http://www.piclist.com PIC/SX FAQ & list archive
> > View/change your membership options at 
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at 
> http://mailman.mit.edu/mailman/listinfo/piclist
> 


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist