In SX Microcontrollers, SX/B Compiler and SX-Key Tool, oliverb wrote:

I use several board makers with PCBExpress being one of them. I use EagleCAD which has the CAM processor built in for the gerber files. I create a CAm file for each board maker I use and then save it. I used PCBExpress last April and archived the CAM processor file to make temporary room om my drive. If your using Eagle you can simply add the .drl file for the drills by modifying the standard gerber output CAM processor. I have a friend who also uses PCBExpress and he uses orCAD.  I use Eagle because changing board houses is a very somple matter and modifying or adding to the existing CAM files is very easy.

Oliver H. Bailey
Author

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=103429#m103527

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)